![]() ![]()
Keep in mind that you will need a Mikrotik CHR License if you plan to use it with more than 1Mbps after the trial license expires. We recommend to read and follow this guide for securing your mikrotik router. #RECOVER MIKROTIK CHR UPDATE#You should now be able to connect using winbox.ĭon’t forget to update the CHR to the latest version and set up the firewall to only accept access from your trusted IPs (Don’t leave everything exposed). ![]() We add the default route /ip route add dst-address=0.0.0.0/0 gateway=2.56.212.1Īnd we set up DNS (we recommend google dns) /ip dns set servers=8.8.8.8,8.8.4.4 Take a look at our powerful MikroTik VPS servers and chose a suitable plan. We next configure the IP address on this interface /ip address add address="2.56.212.40/24" interface=ether1 Check this article for basic CHR security: MikroTik CHR: Basic system protection. ![]() The WAN interface (which should be the only one) is ether1. (Please use a really strong password) /user set 0 password="123456" Then tick No Default Configuration and click on Reset Configuration. This should be done before the network configuration is set. Or go to the System menu, then - into Reset Configuration. The second thing to do is to change the admin password. After power failure the MikroTik router is not starting up. Enter admin as the username and just press enter when asked for the password. If you have forgotten the password, there is no recovery for it.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |